|Location:||Upper Sankusky, Ohio|
|Spans:||14 and 21 modules|
|Location:||Paulsboro, New Jersey|
Save time and money on ground mount installations. Schletter offers sales and rentals for the GAYK HRE Hydraulic Ram, a specialized machine for rapid post installation.For sales or rentals call (520) 289 - 8700 or e-mail email@example.com
|Location:||McKee City, New Jersey|
Now, the #1 solar mounting system for large-scale commercial and utility projects complies with the standard for safety.
Intertek©, the issuing organization of the ETL Classified Mark, engaged in extensive system testing in order to qualify the FS System in its entirety, including all components.FS System Product Sheete
|Rack:||CP 11H x 28 B2 20°|
For businesses wanting to generate solar power while providing parking for their employees, the Park@Sol is the perfect solution. Highly customizable to maximize solar energy production for any lot shape or size.
|System:||Roof and Facade|
|Modules:||Sharp, Samsung, Tianwei|
|Location:||Brooklyn, New York|
Three different types of modules were used in this facade, to cover the entire building and roof awning.
Schletter's solar mounting systems will work with most modules, and are easily adaptable to building archictecture.Facade Systems Brochure
|Project:||Raised 52 inches above the roof surface|
|Size:||12 racks total|
The IsoTop™: The solution for supporting solar mounting structures on low load membrane roofs of industrial buildings. The standard IsoTop unit assembly system works with most industrial roofs yet can be completely customized for individual applications.
In the initial stages, Schletter provides consulting for the planning of the system in order to determine the most economic and design appropriate solution.IsoTop Product sheet
The FS Series of open area mounting systems has a proven world-wide product installation history, with over 4 GW of ground mount systems installed throughout the world with many FS installations ranking among the largest globally.Schletter Mounting and Project
|Rack:||CP 4V x 64 B 10°|
|Location:||Fort Collins, Colorado|
This project illustrates how parking lots are an ideal location for PV systems, allowing power production along with shading of vehicles.
The Park@Sol solar carport system is designed to fit specific application requirements for both residential and commercial areas.Park@Sol Product sheet
|Rack:||1 vertical x 4|
|Size:||16 modules total|
The compactGrid is the perfect solution for sheet metal roofs or when the necessary number of fastenting points on a roof cannot be obtained.
This project uses the Windsafe, a windshield at the back of the solar mounting system to reduce the effect of wind loads. This reduction leads to less ballast needed to secure the system to the roof.Roof Mount Overview
|Install:||GAYK Hydraulic Ram™|
|Rack:||3V x 56|
|Location:||Queen Creek, Arizona|
The FS System is easy-to-install and built to last. Receive start start-to-finish design and engineering guidance, and a high level of pre-assembled parts.
With the GAYK pile driving ram, large solar fields are assembled with ease.FS Product sheet
|Rack:||3V x 8|
|Span:||24 modules total|
|Location:||San Diego, CA|
The Windsafe System is a non-penetrating or penetrating solution (as shown here) for flat roofs with a flexible design allowing for module tilts from 10 to 45 degrees.
With nearly 70‰ pre-assembled components, installation is quick and easy.Windsafe Product Sheet
|Rack:||2V x 14|
|Span:||224 Modules Total|
|Size:||8 Racks Total|
Highly configurable, easy-to-install, built-to-last, and now ETL Listed.
For smaller projects, utilize our FS 2.5 kw Kit, which speeds up design time for the faster delivery.FS 2.5 kw Kit
|Rack:||2H x 6|
|Span:||48 modules total|
|Location:||La Mesa, California|
This solar mounting system shows a non-penetrating ballasted solution for flat roofs with a flexible design allowing for tilts from 10 to 45 degrees.
The Windsafe System is the result of proven technology developed with thorough wind dynamics testing, that has resulted in the reduction of the ballast weight and overall system load on the roof.Windsafe Product Sheet
With a flexible design and module tilt angle, pre-assembled components, and load optimization, the Windsafe System is the perfect residential roof mounting system.
The system may be installed with the Compact Vario or Compact Grid mounting systems, and as a penetrating (as shown here) or non-penetrating system.Windsafe Product Sheet
Designed to span vertical parapet walls on DC row housing, this system avoided the need to connect to the rooftop at all. The racks spanned a range from 20 - 30 feet, and included the use of S4 rails and module clamps.Mounting and Project Planning Brochure Components Overview Brochure
In this project the PV Max was perfect for this small residential area, where no excavation in the ground was necessary.
The PV Max's concrete foundations are perfect for projects that want a short turnaround time or when the soil on site is too rocky for pile driven posts.PV Max Product Sheet